Upgrading

Some of the important changes to note for this release:

• The kubernetes-master charm has been renamed kubernetes-control-plane in line with upstream inclusive naming initiatives. This upgrade will take you through the process of upgrading to the new charm, but because Juju will not rename a deployed unit, it will still appear in your model as kubernetes-master.
• All the charms have relocated from the old Juju Charm Store to the new Charmhub. This means that upgrading each charm will require the use of --switch during the upgrade, as detailed in the following instructions.
• The default CNI for new installs is now Calico, instead of Flannel. The Flannel charm is still supported and you can upgrade to the lastest version as normal.

Before you begin

As with all upgrades, there is a possibility that there may be unforeseen difficulties. It is highly recommended that you make a backup of any important data, including any running workloads. For more details on creating backups, see the separate documentation on backups.

You should also make sure:

• The machine from which you will perform the backup has sufficient internet access to retrieve updated software
• Your cluster is running normally
• Your Juju client and controller/models are running the latest versions (see the Juju docs)
• You read the Upgrade notes to see if any caveats apply to the versions you are upgrading to/from
• You read the Release notes for the version you are upgrading to, which will alert you to any important changes to the operation of your cluster
• You read the Upstream release notes for details of deprecation notices and API changes for Kubernetes 1.24 which may impact your workloads.

It is also important to understand that Charmed Kubernetes will only upgrade and if necessary migrate, components relating specifically to elements of Kubernetes installed and configured as part of Charmed Kubernetes. This may not include any customised configuration of Kubernetes, or user generated objects (e.g. storage classes) or deployments which rely on deprecated APIs.

Infrastructure updates

The applications which run alongside the core Kubernetes components can be upgraded at any time. These applications are widely used and may frequently receive upgrades outside of the cycle of new releases of Kubernetes.

This includes:

• containerd
• easyrsa
• etcd
• calico, flannel or other CNI charms

Note that this may include other applications which you may have installed, such as Elasticsearch, Prometheus, Nagios, Helm, etc.

Upgrading Containerd

By default, Charmed Kubernetes 1.15 and later use Containerd as the container runtime. This subordinate charm can be upgraded with the command:

juju upgrade-charm containerd --switch ch:containerd --channel 1.24/stable

Migrating to Containerd

Upstream support for the Docker container runtime was removed in the 1.24 release. Thus, the docker subordinate charm will no longer function from Charmed Kubernetes 1.24 onwards.

If you are upgrading from a version of Charmed Kubernetes that uses the docker subordinate charm for the container runtime, transition to containerd by following the steps outlined in this section of the upgrade notes.

Upgrading etcd

As etcd manages critical data for the cluster, it is advisable to create a snapshot of this data before running an upgrade. This is covered in more detail in the documentation on backups (including how to restore snapshots in case of problems).

Upgrade the charm with the command:

juju upgrade-charm etcd

To upgrade etcd itself, you will need to set the etcd charm's channel config.

To determine the correct channel, go to the releases section of the bundle repository page and check the relevant Charmed Kubernetes bundle. Within the bundle, you should see which channel the etcd charm is configured to use.

Once you know the correct channel, set the etcd charm's channel config:

juju config etcd channel=3.4/stable

Upgrading additional components

The other infrastructure applications can be upgraded by running the upgrade-charm command. However, unlike previous upgrades, you will need to use --switch to reset the source to charmhub.io:

juju upgrade-charm easyrsa --switch ch:easyrsa --channel 1.24/stable

Any other infrastructure charms should be upgraded in a similar way. For example, if you are using the flannel CNI:

juju upgrade-charm flannel --switch ch:flannel --channel 1.24/stable

Upgrading Kubernetes

Before you upgrade the Kubernetes components, you should be aware of the exact release you wish to upgrade to.

The Kubernetes charms use snap channels to manage the version of Kubernetes to use. Channels are explained in more detail in the official snap documentation, but in terms of Kubernetes all you need to know are the major and minor version numbers and the 'risk-level':

Risk level	Description
stable	The latest stable released version of Kubernetes
candidate	Release candidate versions of Kubernetes
beta	Latest alpha/beta of Kubernetes for the specified release
edge	Nightly builds of the specified release of Kubernetes

For most use cases, it is strongly recommended to use the 'stable' version of charms.

Upgrading the kube-api-loadbalancer

A core part of Charmed Kubernetes is the kubeapi-load-balancer component. To ensure API service continuity this upgrade should precede any upgrades to the Kubernetes master and worker units.

juju upgrade-charm kubeapi-load-balancer --switch ch:kubeapi-load-balancer --channel 1.24/stable

The load balancer itself is based on NGINX, and the version reported by juju status is that of NGINX rather than Kubernetes. Unlike the other Kubernetes components, there is no need to set a specific channel or version for this charm.

Upgrading the kubernetes-master units

As noted at the beginning of this page, kubernetes-master has been renamed kubernetes-control-plane. Following the upgrade, the deployed charm will STILL be known as kubernetes-master to Juju, as it is impossible to change the name of deployed charms.

To start upgrading the Kubernetes master units, first upgrade the charm:

juju upgrade-charm kubernetes-master  --switch ch:kubernetes-control-plane --channel 1.24/stable

Once the charm has been upgraded, it can be configured to select the desired Kubernetes channel, which takes the form Major.Minor/risk-level. This is then passed as a configuration option to the charm. So, for example, to select the stable 1.24 version of Kubernetes, you would enter:

juju config kubernetes-master channel=1.24/stable

Note that although the kubernetes-control-plane charm was used, it is still referred to as kubernetes-master by Juju, and you will need to use that name for any config, scaling or relation operations.

Once the desired version has been configured, the upgrades should be performed. This is done by running the upgrade action on each master unit in the cluster:

juju run-action kubernetes-master/0 upgrade
juju run-action kubernetes-master/1 upgrade

If you have more master units in your cluster, you should continue and run this process on every one of them.

You can check the progress of the upgrade by running:

juju status | grep master

Ensure that all the master units have upgraded and are reporting normal status before continuing to upgrade the worker units.

ceph-storage relation deprecated

The kubernetes-control-plane:ceph-storage relation has been deprecated. After upgrading the kubernetes-control-plane charm, the charm may enter blocked status with the message: ceph-storage relation deprecated, use ceph-client instead.

If you see this message, you can resolve it by removing the ceph-storage relation:

juju remove-relation kubernetes-control-plane:ceph-storage ceph-mon

Upgrading the kubernetes-worker units

For a running cluster, there are two different ways to proceed:

• Blue-green upgrade - This requires more resources, but should ensure a safe, zero-downtime transition of workloads to an updated cluster
• In-place upgrade - this simply upgrades the workers in situ, which may involve some service interruption but doesn't require extra resources

Both methods are outlined below. The blue-green method is recommended for production systems.

Blue-green upgrade

To begin, upgrade the kubernetes-worker charm itself:

juju upgrade-charm kubernetes-worker  --switch ch:kubernetes-worker --channel 1.24/stable

Next, run the command to configure the workers for the version of Kubernetes you wish to run (as you did previously for the master units). For example:

juju config kubernetes-worker channel=1.24/stable

Now add additional units of the kubernetes-worker. You should add as many units as you are replacing. For example, to add three additional units:

juju add-unit kubernetes-worker -n 3

This will create new units to migrate the existing workload to. As you configured the version prior to adding the units, they will be using the newly-selected version of Kubernetes.

Now we can pause the existing workers, which will cause the workloads to migrate to the new units recently added. A worker unit is paused by running the corresponding action on that unit:

juju run-action kubernetes-worker/0 pause
juju run-action kubernetes-worker/1 pause
juju run-action kubernetes-worker/2 pause
...

Continue until all the 'old' units have been paused. You can check on the workload status by running the command:

kubectl get pod -o wide

Once the workloads are running on the new units, it is safe to remove the old units:

juju remove-unit kubernetes-worker/0

Removing these units from the model will also release the underlying machines/instances they were running on, so no further clean up is required.

In-place upgrade

To proceed with an in-place upgrade, first upgrade the charm itself:

juju upgrade-charm kubernetes-worker --switch ch:kubernetes-worker --channel 1.24/stable

Next, run the command to configure the workers for the version of Kubernetes you wish to run (as you did previously for the control-plane units). For example:

juju config kubernetes-worker channel=1.24/stable

All the units can now be upgraded by running the upgrade action on each one:

juju run-action kubernetes-worker/0 upgrade
juju run-action kubernetes-worker/1 upgrade
...

Upgrading the Machine's Series

All of the charms support upgrading the machine's series via Juju. As each machine is upgraded, the applications on that machine will be stopped and the unit will go into a blocked status until the upgrade is complete. For the worker units, pods will be drained from the node and onto one of the other nodes at the start of the upgrade, and the node will be removed from the pool until the upgrade is complete.

Verify an Upgrade

Once an upgrade is complete and units settle, the output from:

juju status

... should indicate that all units are active and the correct version of Kubernetes is running.

It is recommended that you run a cluster validation to ensure that the cluster is fully functional.

Known Issues

A current bug in Kubernetes could prevent the upgrade from properly deleting old pods. You can see such an issue here:

kubectl get po --all-namespaces

NAMESPACE                         NAME                                                          READY   STATUS        RESTARTS   AGE
default                           nginx-ingress-kubernetes-worker-controller-r8d2v              0/1     Terminating   0          17m
ingress-nginx-kubernetes-worker   default-http-backend-kubernetes-worker-5d9bb77bc5-76c8w       1/1     Running       0          10m
ingress-nginx-kubernetes-worker   nginx-ingress-controller-kubernetes-worker-5dcf47fc4c-q9mh6   1/1     Running       0          10m
kube-system                       heapster-v1.6.0-beta.1-6db4b87d-phjvb                         4/4     Running       0          16m
kube-system                       kube-dns-596fbb8fbd-bp8lz                                     3/3     Running       0          18m
kube-system                       kubernetes-dashboard-67d4c89764-nwxss                         1/1     Running       0          18m
kube-system                       metrics-server-v0.3.1-67bb5c8d7-x9nzx                         2/2     Running       0          17m
kube-system                       monitoring-influxdb-grafana-v4-65cc9bb8c8-mwvcm               2/2     Running       0          17m

In this case the nginx-ingress-kubernetes-worker-controller-r8d2v has been stuck in the Terminating state for roughly 10 minutes. The workaround for such a problem is to force a deletion:

kubectl delete po/nginx-ingress-kubernetes-worker-controller-r8d2v --force --grace-period=0

This will result in output similar to the following:

warning: Immediate deletion does not wait for confirmation that the running resource has been terminated. The resource may continue to run on the cluster indefinitely.
pod "nginx-ingress-kubernetes-worker-controller-r8d2v" force deleted

You should verify that the pod has been sucessfully removed:

kubectl get po --all-namespaces

NAMESPACE                         NAME                                                          READY   STATUS    RESTARTS   AGE
ingress-nginx-kubernetes-worker   default-http-backend-kubernetes-worker-5d9bb77bc5-76c8w       1/1     Running   0          11m
ingress-nginx-kubernetes-worker   nginx-ingress-controller-kubernetes-worker-5dcf47fc4c-q9mh6   1/1     Running   0          11m
kube-system                       heapster-v1.6.0-beta.1-6db4b87d-phjvb                         4/4     Running   0          17m
kube-system                       kube-dns-596fbb8fbd-bp8lz                                     3/3     Running   0          19m
kube-system                       kubernetes-dashboard-67d4c89764-nwxss                         1/1     Running   0          19m
kube-system                       metrics-server-v0.3.1-67bb5c8d7-x9nzx                         2/2     Running   0          18m
kube-system                       monitoring-influxdb-grafana-v4-65cc9bb8c8-mwvcm               2/2     Running   0          18m